Home > SHOP > HUSKY POWER > TC 85
Sort By:
Page of 1
FRAME DECALS, TC 85 14-15

For protecting the frame without altering the slender profile of your bike.

Our Price: $19.99
MX HANDGUARDS, TC 85 14-15

Thanks to splitting of the surfaces, these open, very light Husqvarna handguards ensure an uncompromising racing look in the angular Husqvarna design. In two-component injection moulding technology:
- Black mid-section = maximum strength for optimum protection
- Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment
Attached directly at the levers with a special mounting.

Our Price: $57.99
FLEX CLUTCH LEVER, TC 85 14-15

Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.

Our Price: $69.99
FLEX BRAKE LEVER, TC 85 14-15

Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again - these levers are designed to fold away on contact with the ground.

Our Price: $69.99
FACTORY START, TC 85 14-15

This is how the factory riders start!
The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the centre of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically.

Our Price: $89.99
FRONT BRAKE DISC GUARD, TC 85 14-15

Very practical: The intelligent fitting system with a central adapter replaces the spacer sleeve on the wheel axle and allows the tyre to be changed, brake to be serviced, etc., without removing the brake cover.

Our Price: $94.99
BRAKE DISC 210 MM, TC 85 14-15

Full version for muddy track conditions; minimises brake pad wear.

Our Price: $99.99
SKID PLATE, TC 85 14-15

An offroad sortie is no walk in the park! Husqvarna aluminium skid plates provide the most effective protection for frame and engine:

- Made from 4mm-thick, high-strength, robust aluminium
- Extremely hard-wearing and endurance-tested for the toughest offroad use
- Precisely fitting design - specially developed for Husqvarna models
- Highest quality workmanship
- Quick and simple installation

Our Price: $99.99
REAR BRAKE DISC PROTECTOR, TC 85 14-15

Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Made of high-strength aluminium.

Our Price: $99.99
HIGH SEAT, TC 85 14-15

Grow a little with the bike. For the somewhat taller racers of the future. Approx. 20 mm higher than the standard seat.

Our Price: $109.99
LOW SEAT, TC 85 14-15

Just made the switch and not big enough for the bike yet? Also provides shorter riders with optimum control of the motorcycle. Approx. 15 mm lower than the standard seat.

Our Price: $109.99
STEPUP SEAT, TC 85 14-15

The factory rider seat: Thanks to the special step, there's no slipping backwards when you open up the throttle either. Standard height.

Our Price: $109.99
FMF MX SILENCER, TC 85 14-15

The FMF MX-silencers (made in USA) are top-performance silencers.
The benefits:
- Housing made from high-grade, pressed, anodised aluminium
- Factory performance characteristics
- Hi-Flo exhaust technology
- Long service life
- Integrated bracket
- Dynamically formed stainless steel end caps
- Simple fitting

For a perfectly tuned and performance-optimised overall system, we recommend combination with the FMF-pipe.

Our Price: $129.99
WAVE BRAKE DISC 260 MM, TC 85 14-15

Floating, stainless steel brake disc. Since the hot disc can expand, the pressure point remains constant even at extreme temperatures and loads. The best basis for consistently quick lap times. You'll also need brake calliper mounting kit 720.09.960.044 for installation.

Our Price: $159.99
FMF EXHAUST, TC 85 14-15

35 years of racing experience: The FMF factory pipes have been specially developed for the hardships of offroad life. That's why they're made from high quality, extra thick, hardwearing sheet steel. An elegant appearance is ensured by the nickel-plated, stainless, polished surface. For years and years.
Additional features:
- Broader and more usable rev range
- Higher top speed
- More traction, better control when accelerating
- Including O-rings

For a perfectly tuned and performance-optimised overall system, we recommend combination with an FMF MX-silencer.

Our Price: $229.99