WMR PERFORMANCE PRODUCTS

We currently offer:

We are always building, testing and improving products so keep checking the web site for new items. WE BUILD THE BEST REST EQUIPMENT - WINNING IS UP TO YOU!

 

Billet Throttle Tubes

A Billet Throttle Tube is a must have for the serious racer. Don’t end up with a DNF because you fell over in a rut and snapped your plastic throttle tube. We CNC machine our throttle tubes from 6061-T6 aircraft aluminum which makes them much stronger and more durable than stock. This is an easy way to make sure your bike is ready for battle!

Billet Chain Adjusting Blocks  

We have spent thousands of hours building and racing RM 85's. At the 2002 Loretta Lynn's national, Matt Goerke won Suzuki’s first ever Super Mini title on a WMR prepared RM85. One of the trick parts on that bike were the billet chain adjuster blocks that we built. If you ever looked at the stock pieces you could see that they needed help. We CNC machine solid 6061 aluminum blocks that are ten times stronger than stock and can hold up under real race conditions with a 150 pound rider. When you build a super mini you are putting a bigger rider, a stronger motor and a lot more stress on an already stressed out chassis. Under grueling race conditions every part takes a beating. We had problems with the OEM components so we made our own. Get a pair of RM85 billet chain blocks for your bike, and stop worrying about a component failure that could cause major damage!

Billet Suspension Components

Call our suspension department today to find out how we can custom tailor your suspension. We are always testing new ideas to make your forks and shock perform their best. When you call and speak to our suspension technician, tell him your weight, height, skill level, and the type of riding you do and he will explain how you can have your bike custom fit for you. The proper suspension set-up is without a doubt the most important thing you can do to your bike. When your forks and shock are set up properly it gives you  more confidence, and when you're confident you go faster, its that simple!

Race Hauler Accessories

We recently began to develop a line of accessories for your trailer or box van. You will see more items in the future that will help organize your stuff and  keep it secure while you're on the move.

We currently offer BIKE STAYS a great way to hold your bike in your pickup, trailer or van. A clear anodized “U” Channel is slid into a floor bracket receiver that is almost flat when the Bike Stay is not in use. You roll your front tire against the Bike Stay and strap it down, the bike is held as tight as can be. When you're not using the Bike Stays you slide the “U” Channel out of the receiver and store it on the wall in an extra set of receivers that are supplied.  We have been using these great units for years without a single problem. Pick up a set for your hauler. They are strong, top-quality pieces and we know you're going to love them!

We also offer a couple of really nice wall racks for your trailer or box van. They come in two sizes, a large 30" x 32" with 3 shelves and a smaller version 18" x 30" with two shelves and a paper towel holder on the bottom. Both units are made of 1/8" aluminum that has been laser cut for precision. They have aluminum diamond plate shelves that give it a tough, industrial look. They are designed to hold all your oil, cleaners, cans, or what ever will fit into their 5" deep shelves. These units are a must have for your race hauler!

Chemicals

If you haven’t heard of ENGINE ICE HIGH PERFORMANCE COOLANT then you better listen up. Engine Ice is the newest way to keep your aluminum-cylindered race motor running cooler and cleaner than anything else on the market.

Back in the old days when motocross bikes had cooling fins they were always seizing and over heating. When water cooled motors were introduced we all figured that the days of over-heating were over, and they were for a few years. But since the early eighties the bikes have been getting  better and once again the industry is pushing the envelope and designing motors that produce more power than the cooling systems can handle. You have seen the trend of running vented number plates and vented front fenders and larger radiators all in an attempt to keep the motor from over-heating and boiling out the coolant. Before ENGINE ICE all we had was some pink stuff that you mixed with tap water or the green stuff you bought at the auto parts store.

Well ENGINE ICE HIGH PERFORMANCE COOLANT is a totally different product. Made with Propylene Glycol it is completely environmentally safe and non toxic .You can actually drink the stuff. It is mixed with some very secret ingredients, one of which is  De-ionized water, the most pure form of water on earth. There are no harsh chemicals and minerals in DI water. Tap water and even distilled water can damage the inside of your delicate aluminum cylinder by leaving mineral buildup in the water jacket and causing damage to seals.

The best part about ENGINE ICE is that it doesn’t boil until it reaches over 256 degrees. Water alone boils at about 180 degrees and most  motors are always running hotter than that during a race. So what happens is the other stuff starts to boil and steam out of your radiator at 180 degrees leaving less water to cool your over-heated motor. The cylinder gets hotter the piston gets tighter and you loose power at the end of the race when you need it most. Team Yamaha of Troy knows the benefit of ENGINE ICE - just ask Ernesto Fonseca what was in his hot blooded YZF250 when he won the 2001 Super Cross Championship. At WMR we won't run anything else in our bikes. The first thing we do to a new race bike is drain the radiator and pour in ENGINE ICE HIGH PERFORMANCE COOLANT. A ½ gallon bottle of ENGINE ICE HIGH PERFORMANCE COOLANT will last an entire racing season, it’s a small price to pay to protect your race motor!

HOLE SHOT BIKE WASH

We have been using hole shot bike wash for many years now and you can't find a better product for cleaning your bike. Environmentally safe and not harmful to aluminum parts, it was developed for motocross. Many chemicals on the market will clean the bike but when used over time will tarnish the rims and engine as well as dull the plastics. Try some Hole Shot Bike Wash and keep your bike looking new!

Race Wear Clothing

It's important to look good even when you're off the bike. That’s why WMR offers a line of racewear for the fashion conscious. Check out these shirts and hats so everyone will know that you're serious about your racing. Call the shop and order your DC shoes, you will save money compared to the Mall and we can get every thing in the catalog. We also carry a full line of DVS Shoes (Please call for details).

Trick Stuff  
  • Modified Radiators
  • Welded and Powder Coated Frames
  • Stickers

 

WMR Competition Performance is happy to announce the arrival of its new line of motocross performance products. Over the years, we have developed an amateur level race team. While working with the team we were able to build and test many custom made components to maximize the performance of our bikes. This year we are ready to make these items available to the motocross community. You can shop in our online store or call the shop and order over the phone. Either way you can be sure you are getting the highest quality products available that have been tested and proven to perform in real race conditions.

FREE SHIPPING WITHIN 48 CONTIGUOUS STATES!
($8.00 Packaging & Handling applies to all orders)

Click here to order our BILLET PLUG CAP for the new four-stroke
Kawasaki & Suzuki RX250F & RMZ250F (See our Service Bulletin)

 

WE BUILD THE BEST RACE EQUIPMENT,
WINNING IS UP TO YOU.

1-866-WMR-RACE
(1-866-967-7223)
561-434-4478

ABOUT US : SERVICE : PRODUCTS : TECH TIPS : STICKERS : SUPPORT : FAVORITE LINKS : CONTACT US : E-MAIL : HOME PAGE

Copyright © 2003-05 WMR, Inc, All rights reserved.