Home > SHOP > KTM POWERPARTS > 390 DUKE
Sort By:
Page of 3
HEADLIGHT MASK LEFT 15

Black plastic part as a base for our PowerParts graphics kits and for individual painting. Use the following colours for true KTM style: orange - Pantone 021C black - Pantone black 6C Supplied unpainted

Our Price: $6.99
HEADLIGHT MASK RIGHT 15

Black plastic part as a base for our PowerParts graphics kits and for individual painting. Use the following colours for true KTM style: orange - Pantone 021C black - Pantone black 6C Supplied unpainted

Our Price: $6.99
REAR END TOP SECTION LEFT 15

Black plastic part as a base for our PowerParts graphics kits and for individual painting. Use the following colours for true KTM style: orange - Pantone 021C black - Pantone black 6C Supplied unpainted

Our Price: $10.99
REAR END TOP SECTION RIGHT 15

Black plastic part as a base for our PowerParts graphics kits and for individual painting. Use the following colours for true KTM style: orange - Pantone 021C black - Pantone black 6C Supplied unpainted

Our Price: $10.99
TANK PAD 15

Our Price: $19.99
TANK CAP STICKER 15

Our Price: $19.99
UNDER-ENGINE FAIRING 15

Black plastic part as a base for our PowerParts sticker kits and for individual painting. Use the following colours for true KTM style: orange - Pantone 021C black - Pantone black 6C Supplied unpainted.

Our Price: $21.99
RIM STICKER SET

New, three-coloured design
- Set for front and rear wheel
- Pre-cut stickers

Our Price: $21.99
RIM STICKER SET

Stickers are precutted for perfect fitting . Set includes all material for front and rear rim .

Our Price: $26.99
TANK STICKER 15

Lasting protection for the paintwork at areas of the fuel tank subject to heavy wear. - Made from a high quality, elastic base film - Structured surface for better grip - No more unsightly scratches or matt areas on the tank flanks

Our Price: $29.99
FACTORY IGNITION COVER PLUG

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminium and therefore not only look good, they also withstand the toughest treatment? With the anodised aluminium components in the original factory look from the PowerParts range, you can turn your KTM into something very special.

Our Price: $29.99
REAR BRAKE RESERVOIR CAP

CNC-machined design made of high-strength aluminium. Including remote reservoir.

Our Price: $29.99
TANK COVER 15

Black plastic part as a base for our PowerParts graphics kits and for individual painting. Use the following colours for true KTM style: orange - Pantone 021C black - Pantone black 6C Supplied unpainted.

Our Price: $34.99
POWER OUTLET KIT 15

Power supply for the navigation system or any other use.

Our Price: $34.99
MOUNTING FOR GPS BRACKET

Universally applicable option for mounting the GPS bracket. Also for use with other models.

Our Price: $35.99
FACTORY OIL FILTER COVER

CNC-machined design made of high-strength aluminium.
Premium quality, anodised surface finish

Our Price: $38.99
TOURING WINDSCREEN 15

We recommend the touring windscreen for longer trips. Provides improved protection from the wind and relieves the upper body.

Our Price: $39.99
FRONT SLIDE PADS 15

Protects the fork from damage in the event of a minor crash.

Our Price: $39.99
REAR SLIDE PADS

Protects the swingarm in the event of a minor crash.
Cannot be used in combination with PowerParts silencer 905.05.999.500 / 908.05.999.500 / 90505999000 / 90805999000.

Our Price: $39.99
FRONT BRAKE BLEEDER SCREW

Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.

Our Price: $43.99
REAR BRAKE BLEEDER SCREW

Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.

Our Price: $43.99
HELMET LOCK AND DRY BAG

This little package contains all you need for securing your helmet safely on your KTM. Steel cable, number lock and a waterproof bag for your helmet

Our Price: $46.99
HANDBRAKE CYLINDER COVER

CNC-machined design made of high-strength aluminium.
Premium quality, anodised surface finish

Our Price: $49.99
ALUUM REAR SPROCKET 42 15

The features: - Manufactured from high-strength 7075-T6 aluminium - the world's strongest aluminium - Outstanding wear properties - hence extremely long service life

Our Price: $69.99
ALUUM REAR SPROCKET 43 15

The features: - Manufactured from high-strength 7075-T6 aluminium - the world's strongest aluminium - Outstanding wear properties - hence extremely long service life

Our Price: $69.99
ALUUM REAR SPROCKET 44 15

The features: - Manufactured from high-strength 7075-T6 aluminium - the world's strongest aluminium - Outstanding wear properties - hence extremely long service life

Our Price: $69.99
ALUUM REAR SPROCKET 45 15

The features: - Manufactured from high-strength 7075-T6 aluminium - the world's strongest aluminium - Outstanding wear properties - hence extremely long service life

Our Price: $69.99