Home > SHOP > KTM POWERPARTS > RC 390
Sort By:
Page of 2
TANK STICKER 15

Lasting protection for the paintwork at areas of the fuel tank subject to heavy wear. - Made from a high quality, elastic base film - Structured surface for better grip - No more unsightly scratches or matt areas on the tank flanks

Our Price: 14.99
TANK STICKER 15

Lasting protection for the paintwork at areas of the fuel tank subject to heavy wear. - Made from a high quality, elastic base film - Structured surface for better grip - No more unsightly scratches or matt areas on the tank flanks

Our Price: 14.99
RIM STICKER SET

New, three-coloured design
- Set for front and rear wheel
- Pre-cut stickers

Our Price: 21.99
RIM STICKER SET

Stickers are precutted for perfect fitting . Set includes all material for front and rear rim .

Our Price: 26.99
FACTORY IGNITION COVER PLUG

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminium and therefore not only look good, they also withstand the toughest treatment? With the anodised aluminium components in the original factory look from the PowerParts range, you can turn your KTM into something very special.

Our Price: 29.99
REAR BRAKE RESERVOIR CAP

CNC-machined design made of high-strength aluminium. Including remote reservoir.

Our Price: 29.99
FACTORY OIL FILTER COVER

CNC-machined design made of high-strength aluminium.
Premium quality, anodised surface finish

Our Price: 38.99
REAR SLIDE PADS

Protects the swingarm in the event of a minor crash.
Cannot be used in combination with PowerParts silencer 905.05.999.500 / 908.05.999.500 / 90505999000 / 90805999000.

Our Price: 39.99
FRONT BRAKE BLEEDER SCREW

Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.

Our Price: 43.99
REAR BRAKE BLEEDER SCREW

Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.

Our Price: 43.99
HANDBRAKE CYLINDER COVER

CNC-machined design made of high-strength aluminium.
Premium quality, anodised surface finish

Our Price: 49.99
WINDSCREEN RACING BUBBLE" 15

Racing windshield with bubble - Bubble" shape as tried and tested over many years in the world of racing - Improved wind protection: less strain on the neck muscles - Optimised aerodynamics - Without light cut-out - Only for racing!"

Our Price: 69.99
WINDSCREEN RACING BUBBLE" 15

Moto3 racing look for the road. - Bubble" shape as tried and tested over many years in the world of racing - Improved wind protection: Less strain on the neck muscles on longer stretches of motorway and long tours - Optimised aerodynamics - With light cut-out - Colour: transparent"

Our Price: 69.99
MOUNTING BRACKET FOR GPS BRACKET

Mounting for all original Garmin GPS brackets.

Our Price: 69.99
BRACKET FOR AKRAPOVIC SLIP-ON SILENCER

Uncompromising racing look for your KTM, without any annoying pillion footrests:

- Manufactured from high-strength, durable steel

- Extremely light and torsion resistant

- Suitable for Akrapovic slip-on silencer 90505999000 / 90805999000

- Fitted to the pillion foot peg mounting points

- Visually ideal in combination with pillion seat cover 90107940044

Our Price: 99.99
CLUTCH LEVER GUARD "RACE STYLE"

Familiar from MotoGP and our Moto 3 factory bikes:
- Protects the clutch lever in the event of unintentional ground contact
- No unintentional shifting in the event of contact with another rider/vehicle
- Simple exchange of the standard handlebar weight
- Lever guard made from unbreakable plastic
- Handlebar fitting made from high-grade cast aluminium
- Plastic guard is replaceable individually

Our Price: 99.99
BRAKE LEVER GUARD "RACE STYLE"

Familiar from MotoGP and our Moto 3 factory bikes:
- Protects the brake lever in the event of unintentional ground contact
- No unintentional braking in the event of contact with another rider/vehicle
- Simple exchange of the standard handlebar weight
- Lever guard made from unbreakable plastic
- Handlebar fitting made from high-grade cast aluminium
- Plastic guard is replaceable individually

Our Price: 99.99
BRACKET FOR AKRAPOVIC SLIP-ON SILENCER

Uncompromising racing look for your KTM, without any annoying pillion footrests:
- Manufactured from high-strength, durable steel
- Extremely light and torsion resistant
- Suitable for slip-on silencer 90505999000 / 90805999000 / 90805999500
- Fitted to the pillion foot peg mounting points

Our Price: 101.14
CHAIN Z-RING ORANGE

DO YOU KNOW about the differences and benefits of a Z-ring or X-ring chain compared with an O-ring chain?
- The Z-ring or X-ring has 4 contact points in contrast to 2 contact points with the O-ring version
- This means higher flexibility and better running characteristics for the Z-ring or X-ring chain
- The spring effect of the Z-ring or X-ring guarantees consistent and permanent lubrication
- This means a significantly longer service life for the Z-ring or X-ring chain
- The Z-ring or X-ring provides a better seal against penetration by water and dirt

Our Price: 104.99
FOLDABLE AND ADJUSTABLE BRAKE LEVER

"Form follows function" — our PowerParts levers are a visual highlight with technical and ergonomic added value.
- CNC-machined from high-strength aluminium
- Tough black anodised surface finish
- Lever can fold away upwards in the event of a crash
- Adjustable grip width

Our Price: 112.39
FOLDABLE AND ADJUSTABLE CLUTCH LEVER

"Form follows function" – our PowerParts levers are a visual highlight with technical and ergonomic added value.
- CNC-machined from high-strength aluminium
- Tough black anodised surface finish
- Lever can fold away upwards in the event of a crash
- Adjustable grip width

Our Price: 112.39
GRAPHICS KIT 15

Our Price: 119.99
LICENSE PLATE HOLDER SHORT 15

Substantially shortened version of the licence plate holder that perfectly draws attention to the slender rear end. FOR CLOSED COURSE USE ONLY

Our Price: 119.99
ERGO SEAT 15

New styling, greater comfort and more sportiness: everything is combined in the Ergo seat. - Optimised shape: narrower at the front for better control thanks to more contact with the vehicle - Special foam (3D structural mesh) with inbuilt tunnel form for even pressure distribution - Seat height + 20 mm

Our Price: 129.99
REAR BAG SMALL

Small items, such as mobile phone, wallet, keys, etc., are taken care of perfectly. Simple fitting with straps on the pillion seat. The benefit: No difficult-to-fit carriers that spoil the slender rear profile of the bike. With the rear bag attached, the bike can only be used as a single seater. Capacity 2.6 - 8 GAL

Our Price: 144.99
REAR BAG LARGE

The ideal solution for short trips or the daily ride to work.
- Volume: 24 l - 36 l
- Including waterproof inside pocket
- Strap attachment to the pillion seat or the carrier plate

Our Price: 224.99
WAVE BRAKE DISC 320MM

320mm Diameter / 5mm Thick

Black Anodized Inner Ring

Our Price: 243.99
FIBREGLASS UNDER-ENGINE FAIRING 15

Fibreglass under-engine fairing meeting FIM regulations. Fitted to the standard attachment points

Our Price: 249.99
WAVE BRAKE DISC 300MM

300 mm diameter / 5 mm thick

Manufactured from rustless, stainless steel

Black anodised inner ring

Our Price: 259.99