Home > SHOP > KTM POWERPARTS > HANDLEBARS / INSTRUMENTS / ELECTRICAL
Sort By:
Page of 7
Handlebar end Handlebar end

Only for handlebars with an internal diameter of 14.4 mm (0.567 in).
Black

Our Price: $2.99
Grip donut set Grip donut set

Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips.

Our Price: $5.99
Ignition eliminator plug Ignition eliminator plug

Allows the removal of the keyed ignition on EXC models

Our Price: $5.99
Mud grips Mud grips

The mud grips are simply pulled over existing grips and guarantee a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.

Our Price: $7.99
Pull switch bracket Pull switch bracket

With this bracket the pull switch has an accessible, defined location. Recommended in combination with the Y-DISTRIBUTOR SWITCH 777.11.979.044.

Our Price: $7.99
Supplementary wiring harness Supplementary wiring harness

The Y-DISTRIBUTOR allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000.

Our Price: $8.99
Spoiler for handguards Spoiler for handguards

for 7800207900004/20/30

Our Price: $9.99
Hourmeter bracket Hourmeter bracket

For perfect mounting of the hourmeter on the upper triple clamp.

Our Price: $9.99
Hourmeter bracket Hourmeter bracket

For fitting hourmeter SXS.12.450.600.

Our Price: $10.99
Hourmeter bracket Hourmeter bracket

To assemble the hour meter 781.12.920.000 on the triple clamp.

Our Price: $11.99
Supplementary wiring harness Supplementary wiring harness

We recommend use of this auxiliary wiring harness with all power consumers. With this wiring harness, you have the option of fitting additional power consumers to your motorcycle such as grip heaters or fans.

Please note: The power consumer is now connected directly to the battery. Therefore, the Y-DISTRIBUTOR WITH SWITCH is also recommended when installing this auxiliary wiring harness.

Our Price: $14.99
Handlebar end Handlebar end

Great for covering up and protecting open handlebar ends. CNC aluminum and anodized orange.

Our Price: $16.96
Handlebar ends Handlebar ends

Protects grip rubbers from grazing in the event of a fall.

Our Price: $16.99
Grip set Grip set

The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.

The benefits:
» Ergonomic; contour matched to the shape of the hand for maximum comfort
» Small “half waffle” ribs on the rear for secure grip
» Made from two materials with different grades of hardness
» Available in two versions (soft and medium)
» Three areas for the metal safety wire

Our Price: $17.99
Grip set Grip set

The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND safety - because no calluses on the palms and secure grip mean less stress when riding.

The benefits:
» Ergonomic; contour matched to the shape of the hand for maximum comfort
» Small “half waffle” ribs on the rear for secure grip
» Made from two materials with different grades of hardness
» Available in two versions (soft and medium)
» Three areas for the metal safety wire

Our Price: $17.99
Pulling strap Pulling strap

  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Attaches to fork tube

Our Price: $17.99
Pulling strap Pulling strap

  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Attaches to fork tube

Our Price: $17.99
Mirror Mirror

Light and robust.

Our Price: $19.99
Handlebar pad Handlebar pad

Provides optimum protection. Required at most events.

Our Price: $19.99
Clamp Clamp

The clamp and its plastic insert are designed in such a way that the brake and clutch controls twist in the event of a crash, thereby reducing the risk of a lever breaking. Fits all Brembo® brake and clutch controls.

Our Price: $19.99
Grip set Grip set

The KTM 2K (2K = 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips.

» Harder orange material on the inside and at the grip ends for a long service life
» Softer black material on the outside, where the hand lies on the grip, for increased comfort

Our Price: $21.99
Supplementary wiring harness Supplementary wiring harness

The Y-DISTRIBUTOR allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.

Our Price: $21.99
Grip set Grip set

Same as 630.02.021.100, but with open grip ends for closed handguards or bar ends.

Our Price: $24.99
Throttle cable protection Throttle cable protection

This protector is simply attached to the throttle cable guide on the throttle grip, reinforcing the throttle cable at its weakest point.

Our Price: $24.99
Throttle tube Throttle tube

This gives you the option of using traditional grips on models that come standard with Lock-On grips.

Our Price: $24.99
Handlebar pad Handlebar pad

Provides optimum protection with an added time card slot. A small extra pocket allows you to stow small items. Can also be fitted in combination with the PHDS-handlebar support.

Our Price: $24.99
Pulling strap Pulling strap

  • High-strength nylon strap
  • Indispensable for use on extreme terrain
  • Makes it easy to get your bike upright
  • Attaches to rear frame

Our Price: $24.99
Battery compartment Battery compartment

This battery compartment allows you to install the extra powerful 5S LiFePo4 batteries in your bike.

Our Price: $25.99
Clutch lever and brake lever set Clutch lever and brake lever set

Made from high-strength plastic, including bracket for fitting behind the headlight.

Our Price: $26.51
Lock-on grip set Lock-on grip set

Grip replacement made easy! With the KTM PowerParts lock-on grips set, the grips are locked onto the handlebar by a clamp. The laborious process of gluing the grips and securing them with wire is no longer necessary. Includes three different cams to work with two and four stroke models!

Our Price: $26.99